D05 Smart Induction Magnetic Night Light with Time Display,Spec:

1. Using human body sensing and light sensing technology, the night light is on standby during the day, and the night light is automatically turned on when people pass by at night, and the light is automatically turned off 25s after the person leaves
2. High-definition digital tube display design, when people pass by at night, the current time will be displayed immediately. Built-in independent clock power management chip, the clock can still work stably when the power of the product is low, without repeated settings.
3. Built-in gravity sensor switch, the sensor light is placed horizontally or flipped over, the time display rotates accordingly, and the time is always in a positive horizontal position, which is fun and interesting. Built-in vibration sensor switch, in the sensor gear mode, tap the product during the day, and the current time can also be displayed;
4. Slide dimming & knob dimming: Two dimming methods are designed, namely sliding dimming and knob dimming. Increase the interaction between products and users through interactive dimming, adding a touch of fun to functional products.
5. Diffuse lighting design: The non-direct lighting design makes the light softer, does not hurt the eyes, and does not feel glare at night.
6. Preset two groups of yellow light/white light, which can be switched by the button on the back. Among them, the yellow light is 2800K, which is suitable for lighting at night to create an atmosphere; the white light is 4500K, which is suitable for temporary reading, handheld lighting, etc.
7. There is a built-in magnet at the rear, which can be adsorbed on the wall or directly on the refrigerator or iron frame through the supplied magnetic attraction sheet, which is simple and convenient.
8. Applicable to multiple scenarios: It can be applied to multiple locations in home life, without frequent operation of switches, automatic induction, convenient and comfortable.

Product parameters
1. Battery capacity: 600mah
2. Standby time: about 1200 hours
3. Product principle: human body infrared sensor + light sensor
4. Rated power: 0.5W
5. Main material: ABS
6. Applicable area: about 5-15 cubic meters of space
7. Number of lamp beads: 12 leds x 2 (12 warm lights and 12 cold lights)
8. Charging interface: Typec
9. Charging voltage: DC 5V
10. Charging indicator light: red (charging) / off (full charge)
11. Weight: net weight 85 grams

Note: The product has a built-in gravity switch, and there will be a “tick” sound when shaken, which is not a quality problem, please pay attention!

Accessories: instruction manual, charging cable, magnetic attraction sheet, environmental protection paper box.