For DJI Neo Battery Charger YX 3-way Color Screen Charger Hub Charging Station

1. Specifically designed for DJI Neo batteries, it supports PD 65W+ input and can charge up to 3 batteries simultaneously, fully charging them in approximately 42 minutes (batteries not included).
2. Intelligent power matching and safety guarantee: Automatically switches charging modes based on input power (simultaneous or sequential charging)
— Greater than or equal to PD65W: First charges the two batteries with lower power to the same level as the battery with higher power, then charges all three batteries simultaneously.
— Less than PD65W: Enters the charging manager mode, charging external devices in order of battery power from high to low.
3. Dual-function design: Charger + power bank. Converts FLIP batteries into power banks, charging external devices such as mobile phones and remote controllers through a 5V/2A USB-A interface.
4. Dual charging modes to extend battery life:
— Full charge mode: Quickly charges the battery to full.
— Storage mode: Charges batteries with less than 60% power to 60%-65%, suitable for long-term storage (batteries with more than 60% power are not charged).
5. Real-time power display: No need to install the battery in the drone. Just insert it into the charger and check the power level on the color screen to keep track of the battery status at any time.

Parameters:
1. Input Voltage: 5V/9A/12V/15V/20V – 3A
2. DC Output: 8.6V/8A (Max)
3. USB Output: 5V/2.0A (Max)
4. Product Size: 11.4 x 7.4 x 3.2 cm
5. Weight: 99g (without cable)

Packaging List:
Color screen three-way charger x 1
USB-A to USB-C charging cable x 1
USB-C to USB-C charging cable x 1