For DJI Mavic 4 Pro YX Dual-Channel Charger Battery Manager Simultaneous Charging Station

1. Suitable for the DJI Mavic 4 Pro Charger Battery Hub. Input PD 100W+. Two batteries can be fully charged simultaneously in just 90 minutes.
2. Intelligent Matching Safety Assurance:
— PD 65W or greater: Charge the lower-charged battery to the same level as the higher-charged battery first, then fully charge both batteries simultaneously.
— PD 65W or less: Charges in Charge Hub mode, starting from highest to lowest charge.
3. Three Operating Modes:
— Storage Mode: Charges batteries below 60% to 60-65% for long-term storage. (Note: In this mode, batteries above approximately 60% will not be charged.)
— Full Charge Mode: Fully charges the battery.
— Discharge Mode: Converts the Mavic 4 Pro battery into a power bank, charging USB devices, remote controls, or mobile phones. (Mavic 4 Pro batteries are not included.)
4. Comprehensive LED Lights: Charging Indicator, Operating Mode, Input Power Indicator, and Temperature Indicator.

Parameters:
1. Charging Temperature: 0-40 degrees Celsius
2. Input Voltage: 5V-15V/3A; 20V/5A
3. DC Output: 17.2V/7A (Max)
4. USB Output: 5V/2.0A (Max)
5. Net Weight: 108g (including charging cable)
6. Dimensions: 11.7 x 10 x 4.8cm

Packaging Contents: Charger x 1, USB-C to USB-C Charging Cable x 1